All you need to do is just change the pulley wheeler on that tensioner...
it
is replaceble and I have done it... On your car, you loosen up the
tensioner...
remove the belt, but before you do that, draw a diagram of how it is
routed.
You might as well change the belt at this time too.
Then pop off the black cap on the center of that pulley wheel... allen key
to remove it... swap, tighten and reinstall new belt and tension it up.
About the tension... feel how tight the tension is now... that is about
what
you should tighten to when you finish the job.
Pulley wheel is only $21. The belt is only $18... if you get it past $50,
free ****pping. Autohausaz.com Maybe some oil filters, wiper blade or
refill... etc.
|
