Re: Auto body question

apdicenzo wrote:
> i'm replacing a door on a 93 gmc sierra 1500,  the pin holes in the
hinges 
> are worn and oval shaped, how do you fix this, so the door wont sag
> 
> thanks
>  
> 
> 

If it's the actual holes in the hinges and not just worn bushings there 
are a couple ways to repair it. One would be to buy new hinges and 
replace them. The other is to use a welder and weld the worn areas and 
then grind them back to shape.
Make sure that you use new pins and bushings to size the holes if you 
weld them up.

-- 
Steve W.