by The Reverend Natural Light <reverend@[EMAIL PROTECTED]
>
Mar 3, 2008 at 10:50 AM
On Mar 1, 2:19 am, hungry...@[EMAIL PROTECTED]
(hungry 103) wrote:
> I have a 1988 Camaro RS with a 2.8 MPFI and I am planning to swap the V6
> for a 350 with a carb.My question is...can I use the same fuel tank/pump
> with a regulator to lower the fuel pressure? Or will I need to change
> the tank to one for a carb?
Either will work. Pulling the tank is such a pain on those that
you're better off leaving the electric pump and installing a
regulator. It should be the type with an inlet, an output to the
carb, and a return line to the tank.
Have you considered using a fuel injected V8?
