Once you get the hub off you can always take it down to the shop to get the
studs replaced.
"BAD 4 GOOD" <BAD 4 GOOD@[EMAIL PROTECTED]
> wrote in message
news:13efp0qelr5k896@[EMAIL PROTECTED]
> Jeff,
> Remove the brake caliper,remove the rotor,knock out the old stud and
> replace
> it
> by pu****ng the new one in and using a stack of washers and a nut to
> tighten/seat the stud back into
> the rotor.
> Then put it all back together.
>
> Stan
>
>
> "Jeff Hicks" <jeffhicks@[EMAIL PROTECTED]
> wrote in message
> news:1189587719.180282.320310@[EMAIL PROTECTED]
>> Hello, I own a 1982 Camaro, and while driving my front right wheele
>> came off, and in the process sheared off the lug nuts, can some one
>> explain to me the process of fixing this my self, thanks!
>>
>
>
|
