by "JM" <jim.muller@[EMAIL PROTECTED]
>
Apr 13, 2007 at 02:22 AM
Thanks, again, as usual. That did the trick. I just wantes to make sure
there weren't any "Gotchas"
Jim
"damnnickname" <damnnickname@[EMAIL PROTECTED]
> wrote in message
news:d66a772bada3e5fed6417e8c69ada7c6@[EMAIL PROTECTED]
> assuming that the connector and circuit to the egr valve is ok and no
> broken va***m hoses to the valve more themn likely replacing the EGR
valve
> will fix the problem. If this is the original valve i recommend
replacing
> it
>
> Glenn Beasley
> Chrysler Tech
>
