replace all blopwn fuses in the pdc and the fuse box inside the car
Gene wrote:
> Vehicle:
> 1997 Chrysler Sebring Convertible JXI
> 2.5L,V6, Gas, FI, VIN "H", EEB, JXI
>
> I purchased a new code scanner (OBD II).
> I connected the scanner to the DLC connector
> under the dash.
> There is no power to pin 16.
> I tested pin 16 (+), and pin 4 (- and ground) of the DLC
> and the is NO power to pin 16.
> I do not have a wiring diagram that shows the pin-out
> connectors to/from the DLC.
>
> What is the procedure to determine why the DLC pin 16
> lacks at least 8VDC?
>
> THANKS,
> Gene
|
