"royc" <me@[EMAIL PROTECTED]
> wrote in message
news:-IudnXD0-v2WiUHb4p2dnAA@[EMAIL PROTECTED]
>I have a c3 stop n start, 2 months old, the fuse
> box in the glove compartment has no relation****p
> to the hanbook!
> there are only 2 fuses fitted, the positions in
> the handbook show different values to whats
> fitted.
>
> I am looking at there because the cigar lighter
> has stopped working, but both fuses are intact.
> the handbook says it shares fuse with digital
> clock etc, this is still working.
>
Is this two months from being first used or just two months in your
owner****p, if the former you should be contacting your nearest dealer!
> Any ideas where to look for the problem?
>
I assume that you have established that there is in fact no volts at
the lighter housing/chassis terminals - plus at the centre contact
(IIRC) that can be seen when the removable part is pulled out - as
it's not un-common for fag lighters to fail due to heat damage or
deposits on internal contacts.
Failing that, it will be a case of tracing the wiring back to a point
were a the supply voltage is present. Probably a job for an
auto-electrician.
|
