"moray" <mtb_hyphen_rules@[EMAIL PROTECTED]
> wrote in
news:fis9ni$di0$1$8300dec7@[EMAIL PROTECTED]
> Provided everything is free, and moving how it should, then it's most
> likely down to adjustment.
>
> Try winding the adjustment off on the handbrake cable, then manually
> adjust up the adjuster in the offending drum.
>
Thanks for that, I'll give that a go, although I've adjusted the
adjusters in the drums, I haven't wound out the handbrake end that much,
I think. Should I do it with both back wheels off the ground, as I have
been doing it one at a time? Plus, thinking about it, I may have at least
one spring out of place, as far as I can tell from the HBOL
pics/diagrams. Unfortunately, I got the car with the wrong cables fitted,
and a horrible welded on bodge to the handbrake adjuster, so it's quite
possible the springs are in the wrong place. I should really get both
sides off at the same time on axle stands and compare the two.
--
Tunku
"Caution : traces of irony and other metallic objects may be present in
the above post"
|
