Sadly my '94 AX has just become a none starter:-) I suspect the ignition
circuit but am not getting any sense from the ECU fault code output via
the
dashboard diagnostic lamp. According to the Haynes Engine Management
Manual
I should be able to extracxt these by alternately earthing and isolating
Pin
2 of the diagnostic plug but, at position M of the IGN switch the orange
diagnostic lamp on the dashboard just remains continuously alight. I
subsequently tried a Gunsons FCR unit but that produced no feedback either
!!
For information, the AX has the Bosch Monotronic MA 3.0 ECU and is a 954
cc
model. Can anyone give any usefull suggestions - all help greatfully
received
"Everything you thought you knew is just that"
