by "Dad" <knockers@[EMAIL PROTECTED]
>
Feb 15, 2008 at 11:52 AM
"W Moore" <WJMoores@[EMAIL PROTECTED]
> wrote in message
news:47jtj.227660$MJ6.95835@[EMAIL PROTECTED]
> Will I be loosening the hood-to-hinge bolts or the hinge-to-body
> bolts to do the adjustment ?
> I probably will need to mark the position of these so I know just
> how much I am moving them and not too much.?
>
That will depend on how your hood sits, if it's high move the hinge
back on the fender mount. Moving it on the hood mount doesn't move it
up or down much. If you're doing this alone marking it will help.
Note that you don't need to move much more than 1/16" at a time and
that can be to much until you get it straight, then tweak it from
there. Watch that front spacing close and be aware that if somehow you
move the mounting point apart on the fenders the hood will bow up in
the middle.
