"Bob I" <birelan1@[EMAIL PROTECTED]
> wrote in message
news:i%oxj.88$ZJ5.38@[EMAIL PROTECTED]
> The body panel outboard of the battery, forward of the door should come
> off easily. Bolt on top, bolt underneath and the screws inside the
fender.
>
> Dana wrote:
>> Battery died on my 1991 convertible , is that something that can be
>> installed by a not too handy owner . Any thoughts would be appreicated.
>> Thanks in advance .
you need a 10mm open ended wrench to get the panel off, a torx bit of the
correct size for the screws inside the fender, a small wrench that fits
the
battery posts, and a socket wrench with an extension to get to the battery
tiedown bolt on the lower rear of the battery.
regards,
charlie
cave creek, az
|
