charlie wrote:
> "Bob I" <birelan1@[EMAIL PROTECTED]
> wrote in message
> news:i%oxj.88$ZJ5.38@[EMAIL PROTECTED]
>> The body panel outboard of the battery, forward of the door should come
>> off easily. Bolt on top, bolt underneath and the screws inside the
fender.
>>
>> Dana wrote:
>>> Battery died on my 1991 convertible , is that something that can be
>>> installed by a not too handy owner . Any thoughts would be
appreicated.
>>> Thanks in advance .
>
> you need a 10mm open ended wrench to get the panel off, a torx bit of
the
> correct size for the screws inside the fender, a small wrench that fits
the
> battery posts, and a socket wrench with an extension to get to the
battery
> tiedown bolt on the lower rear of the battery.
>
> regards,
> charlie
> cave creek, az
>
>
If you need to buy a 10mm open-end wrench, pick
the thinnest one available. Or, buy the least
expensive and have it ground of filed down to
slide between the bottom of the panel and the rail.
--
pj
|
