by "Dad" <knockers@[EMAIL PROTECTED]
>
Apr 24, 2008 at 06:12 PM
"Roscoe" <Roscoe@[EMAIL PROTECTED]
> wrote in message
news:U4SdnReCjul0n4zVnZ2dnUVZ_tajnZ2d@[EMAIL PROTECTED]
>I have a screw in my Goodyear P275/40ZR18 and it leaks slowly.
> Can I get it plugged or am I 'screwed"?
Plug it, and patch it on the inside and forget it. The reason they do
both is so it cuts down water/dirt separating the plies in the hole,
the patch is to hold the air and backup the plug. There are also some
special plug/patches out there that have a head on them like the
inside patch. Then again if you're racing it all bets are off. My
right rear has a plug in it that has worked well for 2 years, non
runflat rain tire.
--
Dad
05 C6 Silver/Red 6spd Z51
72 Shark Black/Black/4spd
64 Red/red/white top/4spd