"bill allemann" <custom4173@[EMAIL PROTECTED]
> wrote in message
news:NBZFj.24607$Ch6.6431@[EMAIL PROTECTED]
> 2001 Dodge 2500 CTD
> The other day I put the truck in the garage on a nice clear, dry
evening.
> Turning into my driveway, I used the left turn signal and it worked.
Next
> morning it doesn't work, fast cycling when on the left turn signal, and
> brake light also doesn't work on that side. The bulb is fine, the
> connector is clean and dry. No voltage in the connector. Tried new bulb
> anyway, same thing. Right side works normally, running/tail lights
work
> normally both sides. Front turn signal lights work both sides.
>
> I was looking on a schematic and they show a multifunction switch. Is
> there a way this switch could fail and affect just one rear side?
> What is the location of the switch?
> Thanks,
> Bill
>
If you have a 7-way trailer connector at the hitch, check for voltage at
the
terminal in the 9 'o clock position when the brake or turn signal is
supposed to be on. If it works at the 7-way connector the multi-function
switch is fine.
--
Ken
|
