Re: Wram Motor Won't Start

"Bruce" <dg_brousard@[EMAIL PROTECTED]
> wrote in message
news:Xns9A5EC0CAE3DF8dgbrousardyahoocom@[EMAIL PROTECTED]
> "damnnickname" <damnnickname@[EMAIL PROTECTED]
> wrote in
> news:e1d99a11981f41ee0769ee8e84c29372@[EMAIL PROTECTED]
>
> > The first thing to do is find out what fault code is stored in the
memory
> > of the computer.
> >
> > Glenn Beasley
> > Chrysler Tech
>
>
>
> O.K. I got a Code PO335

You have a crankshaft position sensor fault, The sensor could be bad or a
number of other things from a shorted or open 5 volt supply from the PCM .
Crank signal open or shorted. Faulty ground and so on. If you just wanted
to
take a pot shot at it, replace the crank sensor

Glenn