"maxpower" <damnnickname@[EMAIL PROTECTED]
> wrote in
news:MLGdndl036D1TEPanZ2dnUVZ_jmdnZ2d@[EMAIL PROTECTED]
>
> "Bruce" <dg_brousard@[EMAIL PROTECTED]
> wrote in message
> news:Xns9A64A41ECBD41dgbrousardyahoocom@[EMAIL PROTECTED]
>> "maxpower" <damnnickname@[EMAIL PROTECTED]
> wrote in
>> news:Zo6dnetP9raENkbanZ2dnUVZ_ommnZ2d@[EMAIL PROTECTED]
>>
>> >
>> > "Bruce" <dg_brousard@[EMAIL PROTECTED]
> wrote in message
>> > news:Xns9A61D1249FAD0dgbrousardyahoocom@[EMAIL PROTECTED]
>> >> Got part, Dealer said Crank positioned senor was behind the power
>> >> steering pump on the right side of motor, and I would have to pull
>> >> power steering pump bracket. It took 2 hours to remove the pump
and
>> >> bracket, and the
>> > upper
>> >> and lower plastic cover over the cam shaft belt. Could not find
Crank
>> >> positioned senor! Called a local garage, and was told the senor
was
>> >> on other side of motor, over the starter! It was there! Put part
in,
>> >> Started fine, Ran OK for 5 miles, then it cut off the Cruise
Control
>> >> by its self and motor started cutting out (Missing). I will try to
>> >> get a new error
>> > code
>> >> soon. Any Ideas?
>> >
>> >
>> >
>> > Your gonna have to get out your DVO meter and start doing checks
while
>> > you wiggle wires. Since it is an intermittent problem you may have
a
>> > hard time finding it unless you see a shorted wire in the harness
or
>> > bad pin in a connector. Is this a 2 or four door Stratus?
>> >
>> > Glenn
>> >
>> >
>>
>> It's a 4 door, I'm now getting an error code 0300 Could it be the
spark
>> plug wires? They look good and the problems comes and goes. It's
>> starting fine now, just starts missing while driving.
>> Thanks for your help
>> Bruce
>
>
> A P0300 is a multiple cylinder misfire and could be almost anything
from
> fuel problems to plugs and wires, clogged exhaust you name it!!
>
> Glenn
>
>
>
I'm going to put new plug wires on and look at the exhaust Cat.
Converter before I take it to the local garage. I miss the old days of
Chev 283 and 327. I could work on those. I really do thank you for your
help and I'll post the fix if I ever find it!
Thanks! Bruce
|
