I have two easy questions: I have to change the buld for the brake rear
passanger side brake light. I see that there are two small black plugs
just
inside as you open the tailgate. Do you just pull these things out and the
lamp assembly is released so you can get it out to change the bulb
The second question is regarding changing the cerpintine belt that drives
the AC, PS pump etc. On my old 96 Grand you just had to put a power bar in
the idler pulley and pull to release the pressure. This 03 with 3.3 Ltr is
a
different beast. Is the the best approach to go underneath and remove the
small black plastic shroud that covers the belt and somehow remove the
belt
from below.
Maybe its just cause I was used to the old 96 but things sure seemed to be
a
lot easier to get at on the old van, or maybe the old dog just has to
learn
new tricks, any help would be appreciated.
Bill
