by "Bill Falconer" <falconw@[EMAIL PROTECTED]
>
Apr 18, 2008 at 08:22 PM
Thanks for the reply Maxpower
"maxpower" <damnnickname@[EMAIL PROTECTED]
> wrote in message
news:k-2dnVLnKfFceJrVnZ2dnUVZ_vCknZ2d@[EMAIL PROTECTED]
>
> "Bill Falconer" <falconw@[EMAIL PROTECTED]
> wrote in message
> news:qUMNj.8$XI1.6@[EMAIL PROTECTED]
>> I have two easy questions: I have to change the buld for the brake rear
>> passanger side brake light. I see that there are two small black plugs
> just
>> inside as you open the tailgate. Do you just pull these things out and
>> the
>> lamp assembly is released so you can get it out to change the bulb
>
>
> Yes
>>
>> The second question is regarding changing the cerpintine belt that
drives
>> the AC, PS pump etc. On my old 96 Grand you just had to put a power bar
>> in
>> the idler pulley and pull to release the pressure. This 03 with 3.3 Ltr
>> is
> a
>> different beast. Is the the best approach to go underneath and remove
the
>> small black plastic shroud that covers the belt and somehow remove the
> belt
>> from below.
>>
>
> You can do it that way or use a 3/8 breaker bar from the top. We have
the
> vehicles in the air so it makes it easier to do from the bottom
>
>> Maybe its just cause I was used to the old 96 but things sure seemed to
>> be
> a
>> lot easier to get at on the old van, or maybe the old dog just has to
> learn
>> new tricks, any help would be appreciated.
>>
>> Bill
>>
>>
>
>