by Hank <hank@[EMAIL PROTECTED]
>
Jan 7, 2008 at 10:23 PM
On Mon, 7 Jan 2008 14:21:16 -0600, "Dave Ellis"
<dveellis@[EMAIL PROTECTED]
> wrote:
>What might be the cause of a (1986) 6 cylinder Fiero not wanting to start
>after being left standing (with gas in the tank) for a few months?
>
>The electrics seem OK and it will try to start if plus are removed and
the
>cylinders are given a shot of QuickStart.
>
>Currently in the process of draining the old gas and refilling. But will
the
>old standing gas be likely to have fouled the feed lines, fuel filter
and/or
>injectors?
>
>Any suggestions as to attack strategy would be appreciated.
>
I have never had a problem with old gas. I have had a problem with
water in gas as it will settle to the bottom of the tank and you will
only suck up water. If its not even catching a little bit I would
check for spark on one of the wires hook up a timing light hold the
trigger and turn it over. If no spark then check cap and rotor.
Good luck
Hank