by John <highlanders@[EMAIL PROTECTED]
>
Feb 8, 2006 at 11:30 PM
If I remember correctly, the bolts you are trying to remove don't
turn. You will need to remove the brake hub and maybe the brakes pads
to gain access to the bolts on the inside.
John
On Wed, 08 Feb 2006 12:17:59 -0500, "iceman666987"
<hotsxystud4u692002@[EMAIL PROTECTED]
> wrote:
>im working on an 89 festiva i need to replace the spindle on the right
rear
>and im haven one hell of a time with the bolts that hold it on i have
tried
>a setaline torch to heat them up while using an electric impact and these
>bolts just aren budging... i need some new ideas if anyone can help me
out
>with this it would be great.
>
>Thanx much,
