1994 4.0L Ranger - Purchased 16 lb. radiator cap from AutoZone, was told
that what the specification on their computer system. The Mitchell book
notes that the radiator cap should be 13 lb. What is the correct pressure
for the system? Will using a 16 lb. cap cause too much pressure in the
cooling system and cause leaks that you might not have with a 13 lb.
system?
Recently changed ou the water pump and already seeing a leak at one of the
attachment bolts. Used a torque wrench when I replaced the pump and
tightened the bolts down evenly....so I'm wondering if the 16 lb. cap
could
be the problem. Thank you, Joe
