On Wed, 30 Apr 2008 11:56:21 -0500, Moses <moses@[EMAIL PROTECTED]
> wrote:
>I bought a replacment mirror glass for my van- looked like the right
>size but doesn't quite fit. It needs about 1/8" taken from 2 inside
>corners. Can this glass be cut, grinded or sanded without breaking?
The glass companies use a belt sander, fine aluminum oxide wet-dry
belt done wet, IIRC. But if it is tempered glass, you'll know it
almost as soon as you start on it... (Kssssh!) :shock:
Try taking the glass back before you try modifying it - If you own
it and that's final, then try sanding it down. But if you could take
it back and you break it instead...
--<< Bruce >>--
|
