Bruce L. Bergman wrote:
> On Wed, 30 Apr 2008 11:56:21 -0500, Moses <moses@[EMAIL PROTECTED]
> wrote:
>
>
>>I bought a replacment mirror glass for my van- looked like the right
>>size but doesn't quite fit. It needs about 1/8" taken from 2 inside
>>corners. Can this glass be cut, grinded or sanded without breaking?
>
>
> The glass companies use a belt sander, fine aluminum oxide wet-dry
> belt done wet, IIRC. But if it is tempered glass, you'll know it
> almost as soon as you start on it... (Kssssh!) :shock:
>
> Try taking the glass back before you try modifying it - If you own
> it and that's final, then try sanding it down. But if you could take
> it back and you break it instead...
>
> --<< Bruce >>--
>
Thanks, I'll see if theres a glass shop around. The store wouldn't be
happy to take it back since the box was mangled getting it out.
|
