by John <stepri@[EMAIL PROTECTED]
>
May 11, 2008 at 09:22 AM
Thank Jim.
On Sun, 11 May 2008 16:19:06 GMT, "Jim Warman"
<mechanic@[EMAIL PROTECTED]
> wrote:
>The best way to check for a water pump concern is to use a small mirror
to
>look at the weep hole in the housing. Sometimes removing the belt and
>chcecking for paly in the pump shaft can be necessary (don't forget to
give
>it a spin to check for noise or roughness.. ). While the belt is off is
an
>ideal time to check the tensioner, any idlers and the accessories for
smooth
>turning and such.
>
