Had the same problem whe I setup mine. I sent Holley an email and
they replied to make sure that the tach connection was good and also
make sure that I set the proper ignition setting in the software. The
other thing it could be is no fule pressure.
My problem was an incorrect setting on the ignition in the software.
Hope this helps.
Bill
On Sat, 05 Jun 2004 06:48:51 GMT, john.negus.at.online.fr (John Negus)
wrote:
>
>Does anyone have any experience of weaknesses in the Holley Commander
>950?
>
>A friend of mine bought one and set about installing it in a Canam.
>Everything went okay - until the next day. When he reconnected the
>battery (which he'd disconnected overnight for safety), the car, which
>had run fine the previous day, wouldn't start.
>
>Investigating further, everything works except the output bit -
>there's no signal to squirt the juice. But data displays and so on
>work fine.
>John
>
|
