Greetings,
I am trying to replace the power steering pump on my 1998 2.2 L Chevrolet
Cavalier. I have successfully release the tension and removed the V-belt.
I
have also successfully removed all of the bolts and lines (high pressure
and
return line from the old/existing power steering pump assembly.
The problem is that now I cannot get the old/existing power steering pump
out the engine compartment due to bracketry, wires, and lines. So the
questions is what has to be removed in order to properly perform the
extraction of the old/existing power steering pump.
My fear is that the large casted bracket (which looks like an engine
mount)
needs to be removed and I am not exactly sure what is the best procedure
for
doing this without causing any damage.
Any response would be greatly appreciated.
Sincerely,
G Wasmer
Rochester, NY
gwasmer@[EMAIL PROTECTED]
