Tegger <tegger@[EMAIL PROTECTED]
> wrote in
news:Xns9AA4BD0A37375tegger@[EMAIL PROTECTED]
> Tegger <tegger@[EMAIL PROTECTED]
> wrote in
> news:Xns9A89A2C73F236tegger@[EMAIL PROTECTED]
>
>> "howard" <howardh@[EMAIL PROTECTED]
> wrote in
>> news:480e92d2$0$7035$4c368faf@[EMAIL PROTECTED]
>>
>>>
>>> "Jeff" <kidsdoc2000@[EMAIL PROTECTED]
> wrote in message
>>> news:68vPj.7240$XY1.5380@[EMAIL PROTECTED]
>>>> howard wrote:
>>>>> My next door neighbor has a 95 Prelude. He has put what is called
>>>>> a JDM motor or a Japanese domestic motor that originated from
>>>>> Japan. It is a 2.2 liter, DOHC, non-Vtec 4 cylinder. The engine
>>>>> family is F22B. He broke a timing belt and the proper one is not
>>>>> available for U.S. models. I've also checked our local Acura
>>>>> dealer and they don't show an application for that number. The
>>>>> part number is 14400-PT2-004. It has 126 teeth on the belt. Some
>>>>> U.S. model Hondas have a belt with 127 or 125 teeth but not 126.
>>>>> Anybody have any idea where this belt can be gotten? Thanks.
>>>>> Howard
>>>>
>>>> Japan
>>> Duh! Really?
>>>
>>
>>
>>
>> Howard and I have been corresponding via email about this, but since
>> the question has also been posted publicly, I'll also post what I've
>> found so far...
>>
>> I can get both that timing belt and the corresponding balancer belt
>> (13405- PT0-004) up here in Canada. The TB is about $93 and the BB is
>> about $59.
>>
>> The belts do not come up in the Honda database as being for any
>> specific application, but that doesn't really mean anything.
>>
>> We do not yet know for sure if this is a 126-tooth belt. Howard will
>> ask his neighbor to confirm the belt is actually still needed, then I
>> will have one delivered so we can count the teeth.
>>
>
>
>
> For anybody still following this...
>
> Howard ended up finding a local source of supply for this belt, so he
> doesn't need mine.
>
> However...
>
> I have received an email from somebody else who tells me the timing
> belt from a 1988 Dodge Caravan 2.5L will fit the Honda F22B.
> Apparently this Dodge belt is just the right size: 126 tooth, round,
> 24mm (15/16). Dayco, Gates and Duralast all make one under $20.
>
> I have no way of confirming the above, so follow at your own risk.
>
>
And one more thing... The Gates part number is supposed to be T132.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
|
