by "I'm Right" <ImRight@[EMAIL PROTECTED]
>
Jan 28, 2008 at 11:58 AM
You have a voltage leak somewhere that is leaking even a MINISCUL amount of
voltage to the BRAKE lamp circuit.
Alos check the Grounds at the BARAKE lights, It be the cruise is seeing a
slight increase in the resistance at that point.
Cruise is shut-off with a loss of ground (or more than 3 ohms) at the
BRAKE
light bulbs or the slightest amount of Voltage.
"John Martinez" <mrmemo2000@[EMAIL PROTECTED]
> wrote in message
news:479a2f25$0$9062$a82e2bb9@[EMAIL PROTECTED]
> This problem just started. 2002 Rodeo V6 - With cruse on, when I turn
on
> lights (parking or head lamps) it acts like I press the break and
disengages
> the cruse. If I turn the lights back off and click - RESUME - it cranks
> back up. Yes, works just fine without lights on. No, can not turn it
on
> with lights on.
>
> Any ideas where to start??
>
>
