Re: door lock armor fiat punto Mk2

The message <HrhWf.13214$Ph2.797@[EMAIL PROTECTED]
>
from "Rob" <finlayson1nospam@[EMAIL PROTECTED]
> contains these words:

> delock and weld some plates behind it :)

> like to see the little scrotes punch through that :) 

Wouldn't even need to be welded. Cut some thickish sheet, old PC case
outers used to be quite thick - though recent models are very flimsy -
there's no shortage of old PCs if you look around.

Cut to shape and bend to suit - then epoxy into place on the inside of
the door. A six inch square of araldite would take a hell of a lot of
pushing with a screwdriver to shift.

-- 
Skipweasel
Pay no attention to that man behind the curtain.