by "keepitrunning" <keepitrunning123@[EMAIL PROTECTED]
>
Feb 13, 2008 at 09:31 PM
> There are no brakes on the car and I am interested in converting it to
> disc if I could do it with out spending a fortune.
I went to the pick n pull and removed rear brakes from a 1991 Camry. I
had
to reduce the diameter of the backing plate and re-drill the top two holes
and ream out one of the others to fit them to the front of the MGTD. The
back required even further modification. I was able to use the Toyota's
parking brake cables and attach them to the MG's lever. I also installed
a
Japanese (unknown make) master cylinder, replaced all of the brake lines.
I
now have brakes.
Gary
