From: Madmax - view profile
Date: Thurs, Oct 12 2006 9:35 pm
Email: Madmax <madm...@[EMAIL PROTECTED]
>
Groups: alt.autos.mini
Not yet rated
Rating:
show options
Reply | Reply to Author | Forward | Print | Individual Message | Show
original | Re****t Abuse | Find messages by this author
Turbo Jo wrote:
> richmollie wrote:
>> Just to inform u taffy when i say new mini, i dont mean a bwm,i mean
>> new to
>> me. i got a 1993 italian job classic! U shouldnt Assume the worst!!!
> Yes I would try the points ensure they can close nup very quickly some
> of the ones available nowadays seam to wers dow the plastic cam leaver
> very quickly. Set the gap and lubricate the shaft with a very thin light
> smear of grease.
> Cheers
Lubricate your own shaft turdo.
Yeah...you sick *****! Now lubricate your little **** shaft and lets
sword fight.
From: madmax - view profile
Date: Fri, Oct 13 2006 4:32 am
Email: madmax <madm...@[EMAIL PROTECTED]
>
Groups: alt.autos.mini, alt.u.k.gay, alt.homo***ual
Not yet rated
Rating:
show options
Reply | Reply to Author | Forward | Print | Individual Message | Show
original | Re****t Abuse | Find messages by this author
- Hide quoted text -
- Show quoted text -
GrahamL wrote:
> "Turbo Jo" <joe@[EMAIL PROTECTED]
> wrote in
message
> news:7tCdnYsRseh3ObPYnZ2dnUVZ8tadnZ2d@[EMAIL PROTECTED]
>>richmollie wrote:
>>>Just to inform u taffy when i say new mini, i dont mean a bwm,i mean
new
>>>to
>>>me. i got a 1993 italian job classic! U shouldnt Assume the worst!!!
>>Yes I would try the points ensure they can close nup very quickly some
of
>>the ones available nowadays seam to wers dow the plastic cam leaver very
>>quickly. Set the gap and lubricate the shaft with a very thin light
smear
>>of grease.
>>Cheers
> Make sure you set the gap before putting grease on the shaft. I find a
f=
ew
> bob spent on a dwell meter to be worthwhile. You can check the gap by
> simply clipping the meter to the coil and earth. New points do tend to
w=
ear
> closed as Turbo Jo says. I set them on the larger end of the gap range,
=
say
> 2 degrees of dwell less than the spec.
> Graham L
Don't let your points wear too much and go ahead and splurge....grease
your shaft and give it to Bob.
the troll lives in Reno, Nevada.
the troll's ISP is SBC Iternet Services, ( www.sbc.com) and the IP
number is 63.201.28.146
you can phone the ISP and complain about his/her abusive postings.
the phone number is +1 800 648 1626 or email a...@[EMAIL PROTECTED]
the entire abusive posting, including all the header
information.
lets shut this one down.
Reply =BB Rate this post:
From: Madmax - view profile
Date: Fri, Oct 13 2006 2:41 pm
Email: Madmax <madm...@[EMAIL PROTECTED]
>
Groups: alt.autos.mini
Not yet rated
Rating:
show options
Reply | Reply to Author | Forward | Print | Individual Message | Show
original | Re****t Abuse | Find messages by this author
- Hide quoted text -
- Show quoted text -
keith wrote:
> "Taffy" <taffy_tur...@[EMAIL PROTECTED]
> wrote:
>>richmollie wrote:
>>>Just to inform u taffy when i say new mini, i dont mean a bwm,i mean
new=
to
>>>me. i got a 1993 italian job classic! U shouldnt Assume the worst!!!
>>Don't worry Rich, I myself didn't make that abusive post mate.
>>We have an aids infected, backwards, inbred Yank who Trolls newsgroups
>>including this one unfortunately. So just ignore any abuse sent your
>>way because it will most probably be from that freak!
>>Taffy
> the troll lives in Reno, Nevada.
> the troll's ISP is SBC Iternet Services, ( www.sbc.com) and the IP
> number is 63.201.28.146
> you can phone the ISP and complain about his/her abusive postings.
> the phone number is +1 800 648 1626 or email a...@[EMAIL PROTECTED]
> quoting the entire abusive posting, including all the header
> information.
> lets shut this one down.
Now its Reno....when will you guys make up your minds?
|
