just remove enough to gain access to the pump harness connector.
I think this may be a dealer only item, it should not be to expensive,
under
40 bucks I would think.
"BeeP" <beep@[EMAIL PROTECTED]
> wrote in message
news:Wmp3j.18342$Mg1.15582@[EMAIL PROTECTED]
> Thanks NT.
> Do I need to remove the wheel, or just turn it out of the way?
> Are these pumps dealer-only or aftermarket?
> Bob
>
> "NissTech" <Haywood_Jablowme@[EMAIL PROTECTED]
> wrote in message
> news:474cc1b3$0$9872$4c368faf@[EMAIL PROTECTED]
> > gain access to the area in front of the right front wheel, remove
> the fender
> > liner to get to the washer bottle.
> >
> > unplug pump, check for power and ground, if both exist replace pump.
> >
> > if either is missing re****t back
> >
> >
> > "BeeP" <beep@[EMAIL PROTECTED]
> wrote in message
> > news:VnN2j.13449$r81.525@[EMAIL PROTECTED]
> > > 95 w/s washer pump is not working.
> > > Switch cycles the wipers, tank is full, nozzles are clear.
> > > How to access the pump for testing or replacement?
> > > Behind front wheel well?
> > > Please post some instructions.
> > > Dealer item or aftermarket availability....
> > > TIA
> > > Bob
> > > 95 SE
> > > Auto 158K
> > >
> > >
> > >
> >
> >
>
>
|
