by Al Moodie <nospam@[EMAIL PROTECTED]
>
Apr 20, 2008 at 08:30 PM
On Fri, 18 Apr 2008 18:03:58 -0700, "Ed M" <edma@[EMAIL PROTECTED]
> wrote:
>
>I'm no expert but I think it stands for variable intake air system. From
>what I have read it changes the lengh of the intake runners. It's mounted
on
>the intake manifold.
I found it in my 2003 workshop manual:
The VIAS control solenoid valve cuts the intake manifold vacuum
signal for power valve control. It responds to ON/OFF signals from
the ECM. When the solenoid is off, the vacuum signal from the
intake manifold is cut. When the ECM sends an ON signal the coil
pulls the plunger downward and feeds the vacuum signal to the
power valve actuator.
Al Moodie.
