by "Yuting Wan" <ywan03@[EMAIL PROTECTED]
>
Jan 28, 2008 at 06:54 PM
hi,
you can fit the sensors one by one without removing the bumper. some
peugeots or citroens have already had predrilled hole on the bumper and if
not you may have to spend some time to get the holes drill precisely. One
very im****tant thing is not to alter the length of the sensor cable
otherwise you will stuff up the distanse measurement. hope this info
helps.
"Ray Lynch" <raymondlynch21@[EMAIL PROTECTED]
> wrote in message
news:sM3kj.27895$a61.25172@[EMAIL PROTECTED]
> Hi
>
> I have just purchased a rear parking sensor kit from the local Peugeot
> dealer. The kit is fine, but the instructions are similar to an IKEA
fixit
> kit. All diagrams and no words - not very easy to follow!
>
> It would appear that the rear bumper needs to be removed according to
the
> instructions, but it is possible to fit the wiring without taking off
the
> bumper, which would appear to be a two-handed job. Also there are two
> photos which would appear to mean absolutely nothing to the general
> fitting.
>
> Any advice would be appreciated
>
