Re: 405 mark II heater matrix connection leak

Has anyone dealt with a 405 Mark II heater matrix leak, please?
Thanks.



Wichita wrote:
> Hi Well here we are again! This time with a Mark II 405 TD.
> There's just beginning to be an occasional drip, especially on a cold 
> morning.
> 
> I've had the matrix out twice before, BUT on Mark Is, AND I hear
> Mark IIs are a pig. I've got the glove box out by removing the hinge 
> pins (easy) and I can see the metal feeder tubes and the connection to 
> the matrix. The first thing I want to try is just tightening the 
> connection or replacing the o rings. But what do I do next?
> 
> Some say you can drill out the glove box frame and get further with a 
> bit of cutting here and there. I'm not against cutting out part of the 
> lower fascia and gluing it back after.
> 
> But I'd love to hear from someone who has actually done this.
> The alternative - 12 hours to take out the whole fascia etc etc -- is 
> beyond me.
> 
> Thanks.
> 
>