On May 3, 3:40=A0pm, Chris <ch...@[EMAIL PROTECTED]
> wrote:
> Have the disrtibutor looked at it be wear in =A0the shaft which ahs the
> rotor arm at the end of it, if that shaft is worn you can get all sort
> of problems, one way to find out if it is worn remove the cap and try
> and move the shaft side to side if it moves from side to side you got
> problems,when was it serviced? like replace plugs,leads,cap. oil
> etc.the coil might be sparking across to something metal try moving it
> away from metal,
Thanks for the response.
On an 80,000 ml Pug, I expect there will be wear.
could this cause oil contamination?
best wishes.
Sp.
|
