Re: 3.8 coilpacks

In article <96mpr3pps0r45oq95gd04f93hea6sp5b91@[EMAIL PROTECTED]
>, clare at 
snyder.on.ca says...

> Plugs are fine. I'll be checking the wires when it warms up, but the
> spark testers show excellent spark on all six now. Also, absolutely NO
> ignition noise on an AM radio held close to the running engine (which
> is usually a pretty good way of indicating bad spark plug continuity)

Is it a HEI spark tester? Either way a spark tester still wont tell you 
wire resistance. An Ohm meter should always be used. Nothing suprising 
about having 'new' wires that are bad right out of the box. Wires are 
also pron to chafing and if not correctly routed or tied down they wont 
last 40k miles. Factory routing of spark plug wires is pretty bad...


HEI
http://www.matcotools.com/ProductImages/kd2756.jpg

Standard
http://www.matcotools.com/ProductImages/kd2757.jpg