The recall is for the flasher module, not the hazard switch, unless behind
the dash the hazard switch is mounted to the module. I have also heard of
the stalk switches going bad. Your dealer sounds like he is setting you up
by telling you it is the computer, watchout.
"jd2579" <jd.chiassonSP@[EMAIL PROTECTED]
> wrote in message
news:fuog55$spm$1@[EMAIL PROTECTED]
> sodakid2 wrote:
>> I have an 02 Grand Am that developed a sudden problem. I used the turn
>> signal the other day, and when they cancelled the clicking continued
even
>> though they were off. The farther I go without using signals, the
slower
>> the clicking becomes. On s 200 mile run they stopped altogether only to
>> start up when I used them again. I was told by the dealer that it could
>> be a number of things including the computer. Of course they want to
take
>> a look and charge me.....
>>
>> The clicking comes from the front of the console area if that
helps...and
>> stops if I pull the turn signal fuse, but doesn't if I pull the
emergency
>> flasher fuse.
>>
>> Any ideas what is happening and how to go about fixing would be
>> appreciated. Thanks!
> There is a recall for the hazard switch. If I recall correctly the
flasher
> wiring goes through it also. Have a dealer check and see if the recall
has
> been performed on your car, or if it's even applicable. Start from there
> and see where it goes.
|
