by jd2579 <jd.chiassonSP@[EMAIL PROTECTED]
>
Apr 23, 2008 at 08:57 PM
weird wrote:
> The recall is for the flasher module, not the hazard switch, unless
behind
> the dash the hazard switch is mounted to the module. I have also heard
of
> the stalk switches going bad. Your dealer sounds like he is setting you
up
> by telling you it is the computer, watchout.
The recall does state turn signal also. Some thing to look in to anyways:
Recall Number: 03V327000
Summary:
CERTAIN PASSENGER VEHICLES HAVE HAZARD WARNING SWITCHES THAT MAY
EXPERIENCE SOLDER JOINT CRACKING CAUSED BY RAPID TEMPERATURE TRANSITIONS
AND THE SOLDERING PROCESS. IF SOLDER JOINT CRACKING OCCURS AND RESULTS
IN AN OPEN CIRCUIT, THE TURN SIGNALS/HAZARD LAMPS BECOME INTERMITTENT OR
INOPERATIVE.
