bstsurf@[EMAIL PROTECTED]
wrote:
> I am at the end of the adjusting threads and clutch still engages about
> 1-2 inched from end of play- in other words- far from floorboards. I
> have no more threads left at tranny end, do I just need a new cable or
> can I adjust at pedal end? I read it is just a clevis but are there
> not threads on that end too? Thanks!!
One thing that happens is that the cable stretches, especially if it's
the original 20-year-old cable. I'd recommend replacing it before it
breaks and then setting the adjustments back to a normal range.
To (finally!) answer your question, yes, the pedal end is threaded and
it can be adjusted, but the effective adjustment range is small.
****sche says that you should have 17 to 22mm of threaded cable screwed
into the cable.
Chances are that the real problem here is cable stretch and not
adjustments.
Ed
|
