Re: put ****hs on, now have a question...

too late - it took over 5 days for this message to appear on the NG - good 
old Teranews....
"William Noble" <nobody@[EMAIL PROTECTED]
> wrote in message 
news:46ac22af$0$30102$88260bb3@[EMAIL PROTECTED]
> whomever started this thread - if you want to sell those phone dials, 
> contact me please - you can find my email at www.wbnoble.com - don't
reply 
> to this message, it's tied to an account I don't monitor
>
>
> "jolie" <aol@[EMAIL PROTECTED]
> wrote in message 
> news:lGgji.5020$zA4.2351@[EMAIL PROTECTED]
>>I get a lot of road noise when I rotate tires.  So I dont rotate tires 
>>anymore.  Also - ****hs are great wheels, but one wheel just may be a bit

>>out of round.
>> If you're getting vibration - first check is wheel balancing.
>>
>> I had front end vibrations and it was bad control arm bu****ngs and bad 
>> control arm ball joints.
>>
>> It could also be the shock turntable on top of the shock.
>>
>> Jack up front wheel.
>> Grab it at 9 and 3 o'clock.  Shake back and forth.  Any play indicates 
>> bad tie rod ball joint or loose wheel bearings.
>> Grab it at 12 and 6 o'clock.  Shake back and forth.  Any looseness here

>> is shock turntable or lose wheel bearings.
>> To test the control arm ball joint - put 2x4 under the wheel at 6
o'clock 
>> and shack up and down with 2x4.  You may have to feel the control arm 
>> ball joint to see if it is moving - it shouldn't.
>> -- 
>>
>> joliett
>> ______________
>> ______________
>>
>>
>
>
>
> -- 
> Posted via a free Usenet account from http://www.teranews.com
> 



-- 
Posted via a free Usenet account from http://www.teranews.com