by luke_all@[EMAIL PROTECTED]
Dec 30, 2007 at 03:04 AM
Thanks for your response William,
I have tested from the center of the coil and am getting no spark.
I dont have an oscilloscope to check the reference/speed sensor
output. I have checked the resistances and they are in spec. I have
just ordered new speed and reference sensors which should be coming in
a week or so. Hopefully they will fix the sparking problem.
Then i am left with the fuel pump problem!!
With spraying ether/starting fluid (when i do get it sparking), could
that get the fuel pump to switch on...?
