by "William Noble" <nobody@[EMAIL PROTECTED]
>
Apr 17, 2008 at 11:53 PM
you do not specify if this problem ocurs only when the AC is selected on,
or
at any time when the relay is in place - that would be a helpful thing to
know.
the most obvious place to look is at the wire to the compressor clutch
"Boz" <boz53bj77@[EMAIL PROTECTED]
> wrote in message
news:76c69537-2c84-4b31-a90b-7f58705bbb51@[EMAIL PROTECTED]
>I have a 87 944 that keeps blowing the heater ac fuse. I have had this
> problem for a while but forgot about it over the winter. I have
> unplugged the Compressor and replaced the relay and it still blows the
> fuse right when the key is turned on. If I remove the ac relay the
> heater works fine and doesn't blow the fuse.. Is there a known place
> where wires like to rub through on them? It really has me boggled.
> Thanks
** Posted from http://www.teranews.com
**
