by Boz <boz53bj77@[EMAIL PROTECTED]
>
Apr 18, 2008 at 05:57 AM
On Apr 18, 1:53=A0am, "William Noble" <nob...@[EMAIL PROTECTED]
> wrote:
> you do not specify if this problem ocurs only when the AC is selected
on, =
or
> at any time when the relay is in place - that would be a helpful thing
to
> know.
>
> the most obvious place to look is at the wire to the compressor clutch
>
> "Boz" <boz53b...@[EMAIL PROTECTED]
> wrote in message
>
>
news:76c69537-2c84-4b31-a90b-7f58705bbb51@[EMAIL PROTECTED]
>
> >I have a 87 944 that keeps blowing the heater ac fuse. I have had this
> > problem for a while but forgot about it over the winter. I have
> > unplugged the Compressor and replaced the relay and it still blows the
> > fuse right when the key is turned on. If I remove the ac relay the
> > heater works fine and doesn't blow the fuse.. Is there a known place
> > where wires like to rub through on them? It really has me boggled.
> > Thanks
>
> ** Posted fromhttp://www.teranews.com**
It only happens when ac is requested. I have the single black wire
unplugged that runs to a plug with 2 wires in to 1 from the
compressor. Is there another plug for the compressor? I have also
unplugged the cooling fans but still no luck. Thanks
