Re: HELP: ****sche 944 no spark

<jonb55198@[EMAIL PROTECTED]
> wrote:
>
>Yes, but if there is 12V at the coil, should it be sparking?  there is
>12V at the terminals on the coil, the impedances are correct, but we
>aren't getting any spark.

Voltage does not cause the coil to spark.  The CHANGE in voltage causes
the
coil to spark.

If there is 12V on BOTH sides of the coil, there is no voltage across the
coil anyway.
--scott
-- 
"C'est un Nagra.  C'est suisse, et tres, tres precis."