On Nov 27, 9:52 am, PeterD <pet...@[EMAIL PROTECTED]
> wrote:
> On Mon, 26 Nov 2007 19:06:17 -0800 (PST), bassfi****n...@[EMAIL PROTECTED]
wrote:
> >ok i have an '80 chevy 3/4 ton shortbed with 6" lift 35" gumbo mudders
> >with 4.11 gears/ 4speed sm465 tranny...i have a 350 with stock
> >internals,vette heads,edelbrock performer manifold,edelbrock 650
> >carb,headers,3" back to flowmaster single chambers or 40 series(i have
> >a set of both and im going to use what ever works best).i would like a
> >lumpy cam but i need as much power as i can get for when im in the mud
> >and all....i was looking at the comp-xtreme 4x4 -12-239-3 has anybody
> >had any experience with this one???i did some figuring and i came up
> >with some numbers for a cam that might be decent for what i want here
> >they are any let me know what y'all think about them... @[EMAIL PROTECTED]
218/226
> >.462/.480 Lift
> >108 LOBE SEP??
> >how does that sound???and where would i get one of that grind???thanks
> >alot and please let me know...thanks
>
> google is your friend...
>
> You want a cam with as much low end torque as possible. Something
> designed for motor homes or larger trucks. Even with 4.11 gears,
> them's big tires, that truck weighs a lot and you'll need as much
> torque as you can get.
>
> Also what are the gear ratios in the transmission?
yea i no wat ur sayin man...as for the gear ratio in the tranny here
is what i found:
1st - 6.55 NS
2nd - 3.58
3rd - 1.57
4th - 1.0
R - 6.54
it has an rv cam in it now but it aint enuff...plus i want a sum lope
to it haha...i have the heads pulled now to rebuild them and i figured
that while i have her apart i should go ahead and do the cam now...But
i also need her to have a little bit of top end for daily driving and
once ina blue moon i needa take her out on the highway cruisin at only
bout 60..if im lucky haha im def. thinkin bout the x-treme 4x4 from
comp it seems ideal for me....thanks
|
