by Richard Sutherland-Smith <richard.ss@[EMAIL PROTECTED]
>
Apr 3, 2008 at 05:47 PM
> You need to check the hydraulics first. Bleed the clutch line.
> Is the clutch master cylinder good. Is the slave good?
> I inserted an old fan belt and levered the clutch plate. Not hard to
> do.
> Getting the small shaft out is a real ***** though. You may need
> an impact hammer on the sucker.
I usually screw a bolt into the end of the shaft and use a claw hammer
to lever it out
--
Richard Sutherland-Smith
19 Webb Road, Wanganui 4500, NZ
