This is a multi-part message in MIME format.
--------------080609030806060607010804
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Y'know Henry..... I have one of those hitches... Never could figure out
where I got it or what it was for...
Thanks for the photo...
Ray (now I wonder what I did with it?)
blacklarkviii <hwalterjr@[EMAIL PROTECTED]
wrote:
>There were several people looking for a trailer hitch for a Lark sometime
>near the end of March. I had told you I had onne and would take a picture
>and post it here on the newsgroup. Well I finally got back out to the
shop
>with my camera. Here is one picture that I got before my battery died. As
>you can see there are 2 bolt hole that bolts to the frame. They are
16-1/2"
>from center to center. The hole in the part where the ball goes is 5" up
>from the bottom of the hitch. This bolt goes against the bumper. This
bolt
>carries the weight of the tongue of the trailer. It requires a hole be
>drilled on the face of the bumper. Drawtite Co is stamped on the bottom.
As
>you can see I have painted it black. There is some chrome left, but not
>much.I will take $15.00 plus shipping.
>
>Henry
>
>
>
>
>
--------------080609030806060607010804
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Y'know Henry..... I have one of those hitches... Never could figure out
where I got it or what it was for... <br>
Thanks for the photo... <br>
<br>
Ray (now I wonder what I did with it?)<br>
<br>
blacklarkviii <hwalterjr@[EMAIL PROTECTED]
wrote:<br>
<blockquote cite="mid47fc2454$0$30692$4c368faf@[EMAIL PROTECTED]
"
type="cite">
<pre wrap="">There were several people looking for a trailer hitch for a
Lark sometime
near the end of March. I had told you I had onne and would take a picture
and post it here on the newsgroup. Well I finally got back out to the shop
with my camera. Here is one picture that I got before my battery died. As
you can see there are 2 bolt hole that bolts to the frame. They are
16-1/2"
from center to center. The hole in the part where the ball goes is 5" up
from the bottom of the hitch. This bolt goes against the bumper. This bolt
carries the weight of the tongue of the trailer. It requires a hole be
drilled on the face of the bumper. Drawtite Co is stamped on the bottom.
As
you can see I have painted it black. There is some chrome left, but not
much.I will take $15.00 plus shipping.
Henry
</pre>
<center><br>
</center>
</blockquote>
</body>
</html>
--------------080609030806060607010804--
