I found a small bolt which seems to do nothing in its place...
Passenger side half shaft, the longer one, has a bearing.
The bearing is secured in the bearing mount with a snap ring.
On the bottom side of the bearing mount there is a bolt,
maybe 15mm hex head and 1/2 maybe 3/8 long, which
screws up into the bearing mount, but it is too short to touch
it the bearing itself. When I removed the shaft and its bearing
and feel the place where the bolt was expected to stick out
I could feel a deep hole, so the bolt was far, far to short to
make any contact with the bearing...
What is this bolt for? Is this some kind of grease point or what?
|
