Re: Labor time for Waterpump R&R

The hydraulic tensioner for the V6 should be the reusable one. You
just compress the pressure rod. No need to change unless worn, then
you'll hear a rattle in the timing belt area. From AllData 3-5 hours
for the whole job I would say (valve cover and pump). T-belt was about
3-4 hours.


On Aug 18, 5:36=A0pm, "Uncle_vito" <uncle_vito2...@[EMAIL PROTECTED]
> wrote:
> I had the timing belt and water pump replaced on a 2000 4runner with
3.4L
> engine. =A0They also replaced all the pulleys under the timing cover (at
=
least
> 2). =A0No tensioner was replaced (huh??). =A0 No seals either. =A0 I
know=
 you want
> to know the hours, but the cost was exactly $1000.
>
> Vito